HYGROSCOPE PW is an oil coated of 95 % calcium oxide to delay reactivity and is used as a
desiccant in PE Masterbatch, PP Masterbatch, Rubber Compounds and PVC Plastisol
which are cured pressurless (Micro wave system, LCM, Hot air or Fluid bed)
Moisture which presents in all Plastic, PE, PP, Rubber and PVC chemicals, especially fillers,
Calcium Oxide will be absorbed moisture and will change to calcium hydroxide after reaction.
HYGROSCOPE PW should be used in order to prevent blisters and porosity in the following
Plastic and rubber processes;
· PE Masterbatches, PP, Masterbatches, PVC Plastisol....
· Pressurless continuous curing systems like Micro wave, LCM, Hot air, Fluid beds,
· Low pressure curing in the cable industry,
· In cases where the influence of humidity in rubber compounds should be suppressed.
· Industrial application.
Tepe Kimya offers an extensive range of Oil Coated Calcium Oxide
|Raw Material||Filler Masterbatch||Colour Masterbatch||Desiccant Masterbatch|
|PE Resin||20 phr||30 phr||25 phr|
|Filler||75 phr||40 phr||10 phr|
|Calcium Oxide||1.5 phr||1.5 phr||60 phr|
|Zinc Stearate||1.5 phr||1.5 phr||2.0 phr|
|Calcium Stearate||0.5 phr||0.5 phr||1.5 phr|
|PE Wax||1.5 phr||1.5 phr||1.5 phr|